Electronic Design: Computer-controlled, high frequency, full-wave rectified
​
X-Ray Output with Normal Input Voltage: 30/18 mA @ 40-60 kVDC,
25/15 mA @ 62-70 kVDC,
20/12 mA @ 72-80 kVDC,
15/9 mA @ 82-90 kVDC
​
X-Ray Output with Low Input Voltage: 15/9 mA @ 40-60 kVDC,
12.5/7.5 mA @ 62-70 kVDC,
10/6 mA @ 72-80 kVDC,
7.5/4.5 mA @ 82-90 kVDC
​
AC Input: 120 or 230 V; 50/60 Hz; specify voltage desired
​
Line Voltage Adjustment: Automatic, dynamic with low voltage operation system
​
Timer: .02-2 sec as follows: .02-.4 sec (.01 sec steps); .4-1.0 sec (.02 sec steps); 1.0-1.5 sec (.05 sec steps); 1.5-2.0 sec (.10 sec steps)
​
Internal Power Supply: 50 kHz High Frequency Inverter System
​
X-Ray Tube: XDT-F90-0.8 SNM instruments factory
​
Focal Spot Size: 0.8 mm
​
Anode Heat Storage: 7 kHU
​
Total Filtration: 2.7 mm AI equivalent
​
Collimator: Mikasa Model R-300V, continuously adjustable light beam type with adjustable dual integrated laser pointers to indicate central ray and distance in bright ambient light conditions
​
LP4 Laser Pointers: Class IIIa; laser diode; max. output less than 2.2 mW, wavelength 635 mm
​
Exposure Switch: Two stage deadman type
​
Exposure Cord: 8 ft (2.4 m)
​
Power Cord: 20 ft (6.1 m)
​
Size: 7.4 x 6.2 x 12.3 in (18.8 x 15.7 x 31.2 cm)
​
Weight: 14.1 lb (6.4 kg)
​
DR Interface: RJ45 connector
